Ritz Safety
/contentonly.aspx?file=images/categorytop.gif does not exist
Oil and Gas
Applications
Fingerless Gloves
Gloves & Sleeves
2018 Ritz Safety Catalog
Clothing
Rain Gear and Boots
Disposable Coveralls
Lock Out Tag Out
Hi-Viz Apparel & Traffic Safety
Portals
Heat Relief
Clearance & Sale
Gloves
Eye Protection
Arc Flash Protection
Boots
Cold Weather Gear
Confined Space
Construction Products
Ergonomic Support
Eye/Face Protection
Facilities Maintenance
Fall Protection
First Aid
Gas Detectors and Meters
Glasses
Gloves
Head Protection
Hearing Protection
Heat Relief
Hi-Visibility Clothing
Lock-out/Tag-out
Protective Clothing
Rain Gear
Respiratory Protection
Severe Weather
Signs
Storage & Containment
Survey, Marking, Skid Tape
Traffic Safety
Water Safety
Welding Safety
3M Products
Refine Results  
Results displayed: 1-10 of 10
Sort Results By:

Page Size:
Results page: 1
Item ID: ELVJE8000
  • Features (3) sets of belt loops to allow length adjustment from 33" - 36", easy on/off apron style design with two sets of leg straps and buckles and Prolar® protective pads that allow no compromise for safety 

  • Meet ASTM standards for leg protection for chain saw users (F-1897-2008) 

  • One size fits most

PR
Item ID: ELVCU60RV
  • Comes equipped with a six-point ratchet suspension, vented Tectra™ safety cap, visor bracket with steel visor and QuickSnap™ cap-mounted ear muffs (NRR of 27 dB) 

Tectra™ Safety Cap Meets Class G & C Requirements and ANSI 289.1-2009 

Steel visor complies with ANSI Z87, but does not provide high velocity protection 

Note: ANSI Z87 requires that safety glasses must be worn even when wearing a faceshield or screen

EA
Item ID: ELVJE9033
Elvex chainsaw chaps meet the requirements of ASTM Standard for Leg Protection for Chain Saw Users (F-1897-2008). This standard requires that the chaps can stop a chain saw running at 2,750 feet/minute tested at both 45 degrees and 90 degrees to the longitudinal axis of the test sample, under controlled laboratory conditions. Compliance tests are performed by Underwriters Laboratories (UL) in accordance with ASTM F-1414, Measurement of Cut Resistance to Chain Saw Lower Body Protective Clothing. The performance requirements previously were 2,500 feet per minute chain speed. Available in 33", 36" and 39" lengths.
EA
Item ID: ELVJE9036
Elvex chainsaw chaps meet the requirements of ASTM Standard for Leg Protection for Chain Saw Users (F-1897-2008). This standard requires that the chaps can stop a chain saw running at 2,750 feet/minute tested at both 45 degrees and 90 degrees to the longitudinal axis of the test sample, under controlled laboratory conditions. Compliance tests are performed by Underwriters Laboratories (UL) in accordance with ASTM F-1414, Measurement of Cut Resistance to Chain Saw Lower Body Protective Clothing. The performance requirements previously were 2,500 feet per minute chain speed. Available in 33", 36" and 39" lengths.
EA
EA
Item ID: ELVCU30LV
Elvex®'s ProGuard™ Integrated Logger System includes a 6-point ratchet suspension, vented Tectra™ safety cap, QuickSnap™ cap mounted earmuffs with 25 NRR, a visor bracket and a Lexan® face shield. Meets Class C Requirements, ANSI Z89.1 and ANSI Z87.1+ standards.
EA
Item ID: ELVJE70SM
The ProVest™ II is designed to protect the upper chest and shoulder area from dangerous saw kickbacks encountered during chainsaw cutting. Prolar™ padding in these areas effectively jams chainsaw chains in miliseconds, which stops the cutting action. ProVest™ II is breathable and water-resistant. Made of a 65/35 poly-cotton blend with an open side design, the vest includes a mesh back panel, adjustable side buckles and six handy pockets - 4 outside-front and 2 inside. Available in sizes SM - XL
EA
Item ID: ELVJE70MD
The ProVest™ II is designed to protect the upper chest and shoulder area from dangerous saw kickbacks encountered during chainsaw cutting. Prolar™ padding in these areas effectively jams chainsaw chains in miliseconds, which stops the cutting action. ProVest™ II is breathable and water-resistant. Made of a 65/35 poly-cotton blend with an open side design, the vest includes a mesh back panel, adjustable side buckles and six handy pockets - 4 outside-front and 2 inside. Available in sizes SM - XL
EA
Item ID: ELVJE70LG
The ProVest™ II is designed to protect the upper chest and shoulder area from dangerous saw kickbacks encountered during chainsaw cutting. Prolar™ padding in these areas effectively jams chainsaw chains in miliseconds, which stops the cutting action. ProVest™ II is breathable and water-resistant. Made of a 65/35 poly-cotton blend with an open side design, the vest includes a mesh back panel, adjustable side buckles and six handy pockets - 4 outside-front and 2 inside. Available in sizes SM - XL
EA
Item ID: ELVJE70XL
The ProVest™ II is designed to protect the upper chest and shoulder area from dangerous saw kickbacks encountered during chainsaw cutting. Prolar™ padding in these areas effectively jams chainsaw chains in miliseconds, which stops the cutting action. ProVest™ II is breathable and water-resistant. Made of a 65/35 poly-cotton blend with an open side design, the vest includes a mesh back panel, adjustable side buckles and six handy pockets - 4 outside-front and 2 inside. Available in sizes SM - XL
EA
Results page: 1
Can't find what you're looking for?
  • Refine your search results
  • Let us help: Customer Service or call (800) 451-3077